Illuminate your fishing ventures with Alumiglow Heat Cured Glow Powder Paint for Tungsten Ice Fishing Jigs. This durable powder paint is brighter and longer-lasting than other alternatives and provides superior glow times of up to 8+ hours (green/aqua), or up to 15 minutes (red/orange/violet). Through heat curing and a clear coat, this glow powder paint is guaranteed not to chip, peel, or crack.

 

Directions

1. Heat object with heat gun (low setting), over a flame or in an oven at 375 degrees Fahrenheit.   Note: the oven used should not be one shared with food preparation.

2. Shake powder paint to loosen it.

3. Dip you jig / lead head (etc..) into powder, swish quickly and remove.

4. Repeat heat-and-dip process additional times for a thicker / brighter coating.

5. Optional: dip your jig / lead heat into clear powder paint for an extra glossy and hard finish.

6. Cure your jig / lead head at 375 deg-F for 10 minutes.

7. For larger jigs and increased cost savings, transfer glow powder from provided jar to a fluid bed.

8. To achieve the brightest glow, pre-coat your jig with white non-glowing powder paint.

Charging Your Jig

• Use a 365 nm UV flashlight, ambient room light or sunlight. Halogen and incandescent lights can be used also.

• Note: The violet color does not charge-up well under a UV light. It is best to use sunlight, or other type of flashlight.

Our Guarantee

This item includes a 100% money-back guarantee. If you're not completely satisfied with your purchase for any reason, send it back within 30 days of delivery, and you will receive 100% of the final bid price GUARANTEED!